Epson ES-300C Product Support Bulletin(s) - Page 14

PSB No: P-0077 Page: 6 of 11 EPL-7000 cont. [E] REMOVE CARD You may have inserted a font card or cartridge while the printer was on line or while the FEED light was on. Data still remains in the printer's buffer. [E] RESELECT TRAY The optional lower paper cassette is not installed and the INPUT option is set to OPT or AUTO. [S] RESET The printer is being reset to the previous settings in the macro specified with LOAD MACRO option in SelecType Level 1. [S] ROM Check The printer is checking ROM. [E] SAVE MEMORY OVERFLOW lf this message appears when you are trying to save a macro with the SAVE MACRO option in SelecType Level 1, the printer does not have enough memory to save any additional macros [E] SERVICE REQ. CXXX A controller error has been detected. [E] SERVICE REQ. EOOXX A print engine error has been detected. XX= 03 Fusing Unit (low temp) 04 Main Drive Motor 05 Ozone Fan motor 06 Polygon Mirror Drive 09 HSync Signal [E] SET FULL PRINT This message may appear when you are trying to print graphics or a mix of text and graphics. [S] STANDBY MODE When both CH P and CH S remain off for about thirty minutes, the printer enters standby mode and this message appears. [E] STARTUP ERROR lf this message appears when you turn on the printer, the power may have been turned off while the printer was performing a save or reset operation.