Epson ET-16600 Users Guide - Page 321

• If you set the product to save received faxes on a memory device, connect the selected memory device containing the save fax folder to the product. Once the faxes are saved on the memory device, they are deleted from the product's memory. Note: Make sure the memory device has enough available memory and is not write protected. • If the memory is full, try the following: • Send a monochrome fax using the direct sending feature • Send your faxes in smaller batches • If the product cannot print a received fax due to a product error, such as a paper jam, the memory full error may appear. Clear any product errors, then ask the sender to resend the fax. Parent topic: Solving Faxing Problems Sent Fax is Received in an Incorrect Size If your recipient receives a fax in an incorrect size, try these solutions: • If you are trying to fax an A3-size document, make sure the recipient's fax machine supports the paper size. If the message OK (Reduced Size) appears in the fax transmission report, the recipient's fax machine does not support A3-size documents. • If you are sending a fax using the scanner glass, make sure your original is placed correctly and that the correct paper size is selected on the control panel. • Clean the scanner glass and document cover. Parent topic: Solving Faxing Problems Related tasks Cleaning Your Product Related topics Placing Originals on the Product Received Fax is Not Printed If a received fax is not printed, try these solutions: • Make sure the product is free of errors. The product cannot print received faxes if an error has occurred with the product, such as a paper jam. 321