Epson ET-2720 Users Guide - Page 145
Head Cleaning, Caution, Nozzle Check, Parent topic, Related references, Related tasks
View all Epson ET-2720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
5. Select Head Cleaning and press the OK button. 6. Press the start button to clean the print head. Caution: Never open the inner cover or turn off the product during a cleaning cycle or you may damage it. You see a message on the LCD screen and the power light flashes throughout the cleaning cycle. When the cleaning cycle is finished, the power light stays on and you see a message on the LCD screen. 7. Select Nozzle Check, press the OK button, and press the start button to run a nozzle check and confirm that the print head is clean. If you don't see any improvement after cleaning the print head up to 3 times, turn off the product and wait at least 12 hours. Then run a nozzle check and try cleaning the print head again. If quality still does not improve, run a Power Cleaning. If there is still no improvement, contact Epson support. Parent topic: Print Head Cleaning Related references Where to Get Help Related tasks Checking the Nozzles Using the Product Control Panel Refilling the Ink Tanks 145