Epson ET-2720 Users Guide - Page 39
Wi-Fi Protected Setup (WPS), Using WPS to Connect to a Network
View all Epson ET-2720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
You see the icon on the LCD screen and should be able to connect to your product directly from your computer or device, and then print. Note: If the icon is displayed on the LCD screen, Wi-Fi Direct mode is not enabled. Repeat these steps to try again. Parent topic: Wi-Fi Direct Mode Setup Wi-Fi Protected Setup (WPS) If your network uses a WPS-enabled wireless router or access point, you can quickly connect your product to the network using Wi-Fi Protected Setup (WPS). Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details. Using WPS to Connect to a Network Parent topic: Wi-Fi Networking Using WPS to Connect to a Network If you have a WPS-enabled router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network. 1. Press the WPS button on your router. 2. On the product, press the home button, if necessary. 3. Press the arrow buttons to select Wi-Fi Setup then press the OK button. 39