Epson EX71 User's Guide - Page 43
Shutting Down the Projector, If you don't want to turn it off - lamp life
View all Epson EX71 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Shutting Down the Projector This projector incorporates Instant Off technology. To turn it off, you can press its Ppower button as described below, unplug it, or turn off a power switch that supplies power to the projector. You don't have to wait for the projector to cool down first. 1. To turn off the projector, press the Ppower button on the remote control or projector. You see a confirmation message. (If you don't want to turn it off, press any other button.) 2. Press the Ppower button again. The projection lamp turns off and the projector beeps twice. You can then unplug the power cord. If you want to turn the projector on again, make sure the orange Ppower light is not flashing, then press the Ppower button. note Lamp life will vary depending upon mode selected, environmental conditions, and usage. Turn off this product when not in use to prolong the life of the projector. You can set the projector to automatically turn off the lamp and enter "sleep mode" when it has not received any signals for 1 to 30 minutes (see page 71). This conserves electricity, cools the projector, and extends the life of the lamp. If you want to start projecting again, press the P power button. If you are done using the projector, unplug the power cord. Setting Up the Projector 43