Epson LQ 870 User Manual - Page 123
Interface Specifications, Specifications and Pin Assignments, Technical Specifications
View all Epson LQ 870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Interface Specifications Your printer is equipped with a parallel interface Specifications and pin assignments The built-in parallel interface has the following characteristics: Data format: B-bit parallel Synchronization: STROBE pulse Handshake timing: BUSY and ACKNLG signals Signal level: TTL compatible level Connector: 36-pin 57-30360 Amphenol connector or equivalent Connector pin assignments and a description of their respective interface signals are shown in the following table. Signal Return Pin Pin 1 19 2 20 3 21 4 22 5 23 6 24 7 25 8 26 9 27 10 28 Signal Direction Description STROBE in DATA 1 IN DATA 2 IN DATA 3 IN DATA 4 IN DATA 5 IN DATA 6 IN DATA 7 IN DATA 8 IN ACKNLG OUT STROBE pulse to read data. Pulse width must be more than 0.5 microseconds at the receiving terminal. These signarelspreseintformation of the 1st to 8th bits of parallel data, respectively. Each signal is at HIGH level when data is logical 1 and LOW when it is logical 0. About an 1 l-microsecond pulse. LOW indicates that data has been received and that the printer is ready to accept more data. 7-10 Technical Specifications