Epson LQ 870 User Manual - Page 25
Run the self test using paper at least, inches wide for
![]() |
View all Epson LQ 870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Testing the Printer - 3. Move the left edge guide until it locks in place next to the arrow guide mark. Then adjust the right edge guide to match the width of your paper. CAUTION: Run the self test using paper at least 210 mm (8 i inches) wide for the LQ-870 or 360 mm (14 inches) - wide for the LQ-1170; otherwise the print head prints directly onto the platen. 4. Insert a sheet of paper down between the edge guides until it meets resistance. After about two seconds, the printer loads the - paper automatically and starts the self test. -. 1-12 Setting Up the Printer
![](/manual_guide/products/epson-lq-870-user-manual-f619aa7/25.png)
Testing the Printer
-
3.
Move the left edge guide until it locks in place next to the
arrow guide mark. Then adjust the right edge guide to match
the width of your paper.
CAUTION:
Run the self test using paper at least
210
mm
(8
i
inches) wide for the
LQ-870
or
360
mm
(14
inches)
wide for the LQ-1170; otherwise the print head prints
directly onto the platen.
-
4.
Insert a sheet of paper down between the edge guides until it
meets resistance. After about two seconds, the printer loads the
-
paper automatically and starts the self test.
-.
1-12
Setting Up the Printer