Epson LX-810 User Manual - Page 195

Printing Problem The font selected by SelecType is not printed. Solution The software may not be properly installed for your printer. Use the program's setup (or install) procedure to check the printer settings and reset as needed. Your software may be overriding your SelecType setting. If your program allows you to change the printing style, software control will override the SelecType settings. Make sure that the printing commands used in the software are correct, then try printing again. The print position is not what you expected. Printing starts too high or too low on the page. The loading position may be incorrect. Use micro-adjustment to adjust the loading position. Refer to 3-12. If the problem persists, check the top margin set by your application software and adjust it. Line spacing is incorrect. Line spacing is too tight or too far apart. If your application program is capable of sending control codes, specify the line spacing using ESC 0, ESC 1, ESC 2, ESC 3 or ESC A. Refer to 9-15, 9-16. Troubleshooting 7-9