Epson MX-80 F/T User Manual - Page 20

Cut paper sheet, the platen. See Fig. 20.

Get Epson MX-80 F/T - Impact Printer PDF manuals and user guides View all Epson MX-80 F/T manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Roll Paper Fig. 18 Loading of Roll Paper (2) Roll Paper Manual Paper Feed Knob Fig. 19 Loading of Roll Paper (3) 7.3. Cut paper sheet 7.3.1. Loading of cut paper sheet The MX-80 F/T accommodates cut paper sheets measuring 8.3" to 8.5" in width. To load a cut paper sheet, observe the following procedure. STEP 1. Raise the printer lid. STEP 2. Unlock the release lever. (See Fig. 20.) STEP 3. Pull the scale toward the front of the Printer to detach the scale from the platen. (See Fig. 20.) STEP 4. Confirm that the paper guide roller is at the center of the sprocket shaft. If not, set it at the center of the shaft. NOTE: The paper guide contributes to smooth paper feeding. STEP 5. Insert the cut paper sheet between the paper guides at the rear part of the printer mechanism. NOTE: The paper sheet can be installed without removing the separator. -14-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
Roll Paper
Fig. 18 Loading of Roll Paper (2)
Roll Paper
Manual Paper Feed Knob
Fig. 19 Loading of Roll Paper (3)
7.3.
Cut paper sheet
7.3.1. Loading of cut paper sheet
The MX-80 F/T accommodates cut paper sheets measuring
8.3” to 8.5” in
width. To load a cut paper sheet, observe the following procedure.
STEP 1. Raise the printer lid.
STEP 2. Unlock the release lever. (See Fig. 20.)
STEP 3. Pull the scale toward the front of the Printer to detach the scale from
the platen. (See Fig. 20.)
STEP 4. Confirm that the paper guide roller is at the center of the sprocket
shaft. If not, set it at the center of the shaft.
NOTE: The paper guide contributes to smooth paper feeding.
STEP 5. Insert the cut paper sheet between the paper guides at the rear part of
the printer mechanism.
NOTE: The paper sheet can be installed without removing the separator.
-14-