Epson MX-80 F/T User Manual - Page 40
Control Codes, When AUTO FEED XT Pin No. 14 is at LOW level or DIP switch pin 2-2
View all Epson MX-80 F/T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Table 8 Special Characters/Symbols [781~ { 1 [7c1 I-I f cl 6 II [7D1~ } 6 ii j [7E] H - " P 9. Control Codes Various kinds of control codes are contained in Tables 6 and 7. These control codes are recognized by the MX-80 F/T, and the Printer performs specified functions upon receipt of these codes. The following are descriptions of respective control codes. (1) CR (Carriage Return) When the CR code is transmitted to the print buffer, all data stored in the print buffer is printed. (When AUTO FEED XT (Pin No. 14) is at "LOW" level or DIP switch pin 2-2 is ON. the paper is advanced one line automatically after printing.) NOTE: When 80 columns of print data (including spaces) are continuously re- ceived and the following data is valid and printable, the Printer automatically begins to print the data stored in the print buffer. In this case, if AUTO FEED XT is at "LOW" level or DIP switch pin 2-3 is ON, the paper is advanced one line after printing. -34-