Epson NX115 Start Here - Page 5

5 Install software Your software works with Windows® 2000, XP, XP Professional x64 Edition, Windows Vista®, and Mac OS® X 10.3.9, 10.4.11, and 10.5.x. Windows 1 Make sure the NX110 Series is NOT CONNECTED to your computer. Note: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. 2 Insert the NX110 Series Software CD. With Windows Vista, if you see the AutoPlay window, click Run SETUP.EXE. When you see the User Account Control screen, click Continue. 3 Click Install and follow the on-screen instructions. 4 When you see the screen below, click the first option and then click Next, unless the NX110 Series is connected to your computer through an external print server. If you're using an external print server, click the second option, click Next, then skip to step 6. 5 When prompted, connect a USB cable. Use any open USB port on your computer. Note: If installation doesn't continue after a moment, make sure you securely connected and turned on the NX110 Series. 6 Follow the on-screen instructions to install the rest of the software and register your NX110 Series. 7 When you're done, remove the CD. You're ready to print, copy, and scan! See your on-screen Epson Information Center for instructions.