Epson PowerLite 1830 Network and PC Free Operation Guide - Page 24

Using Multi-Screen Display 24 Procedure Before Using the Multi-screen Display Function 1. Setting the Virtual Display s p.24 In a Windows environment, enable the virtual display driver as necessary. And, for both Windows and Macintosh, set up the virtual display arrangement. 2. Allocating the image to be projected s p.28 Open the file to be projected, and then move the screen to the virtual display according to the actual projection arrangement. 3. Projecting the allocated images s p.29 Allocate a virtual display number to a projector that is connected through the network, and then start projection. Setting the Virtual Display This section explains the virtual display for arrangement example 1. s p.23 Enable the virtual display driver (Windows only) Enable the virtual display driver. Those users listed below do not have to perform this operation. Go to procedure s "Adjusting the Virtual Display" p.25. • Those users who have enabled virtual displays installing EasyMP Network Projection. • For Macintosh users. Procedure A Start Windows on the computer, then select "Start" "Programs" (or "All Programs") - "EPSON Projector" "Add-Remove EPSON Virtual Display". The Add-Remove EPSON Virtual Display screen is displayed. B Select the virtual display you want to use. Up to four monitors can be added. In this example, a single virtual display is to be used. When setting multiple virtual displays, select as many displays as is necessary. Any one of the displays can be selected. C Click "OK". When you click OK, the drivers for the virtual display are enabled. At this point, it is normal for the display to flicker. Wait for the Add-Remove EPSON Virtual Display screen to close.