Epson PowerLite 4770W User Manual - Page 117
Setting the Remote Control ID
View all Epson PowerLite 4770W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
2. Select the Extended menu and press Enter. 3. Select the Multi-Projection menu and press Enter. 4. Select Projector ID and press Enter. 5. Use the arrow buttons on the remote control to select the identification number you want to use for the projector. Then press Enter. Repeat these steps for all the other projectors you want to operate from one remote control. Parent topic: Projector Identification System for Multiple Projector Control Setting the Remote Control ID The remote control's ID is set to 0 by default so it can operate any compatible projector. If you want to set the remote control to operate only a particular projector, you need to set the remote control's ID to match the projector's ID. 1. Turn on the projector you want the remote control to operate with exclusively. 2. Set the remote control ID switch to On. 117