Epson PowerLite 4770W User Manual - Page 140
A/V Output, A/V Settings
View all Epson PowerLite 4770W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Setting Projection Operation A/V Settings Standby Mode Options Front Front/Ceiling Rear Rear Ceiling - A/V Output Monitor Out Audio Settings Communication On Communication Off 140 Description Selects the way the projector faces the screen so the image is oriented correctly See the last table in the topic Selects various audio and video output settings A/V Output: select this setting to output audio and video to an external device when the projector is in standby mode (Standby Mode must be turned on to use this setting) Monitor Out: Select the image source to output to an external device when the projector is in standby mode. When set to Auto, an analog RGB signal from the Computer or BNC port is output depending on which source was selected when the projector went into standby mode. Audio Settings: Selects audio source to output Enable this setting to allow the following operations to occur when the projector is in standby mode: • Monitor and control the projector over a network • Output audio and video to an external device (A/V Output must be set to Always On)