Epson PowerLite 480 Quick Setup - Page 1

PowerLite® 470/475W/480/485W Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Connect the projector Choose from the following connections. See the sections below or the online User's Guide for details. Computer VGA cable USB cable HDMI cable USB Port Connect the square end of a USB cable to the projector's USB TypeB (square) port. Connect the flat end of the cable to any USB port on your computer. Windows® 2000 SP4 or later: After turning on the projector, follow the on-screen instructions to install the Epson USB Display software (EMP_UDSE.EXE; only on first connection). Note: If the software screen does not display automatically, open My Computer or Computer, then double-click EPSON_PJ_UD. Mac OS® X 10.5.1 or higher: After turning on the projector, the setup folder for USB Display appears in the Finder. Double-click USB Display Installer and follow the on-screen instructions to install the Epson USB Display software (only on first connection). Monitor Port Connect one end of a VGA cable to the projector's Computer1 or Computer2 port, and the other end to your computer's monitor port. If you are using a laptop, switch it to external display (see "Troubleshooting"). You can also connect an audio cable. HDMI Port Connect one end of an HDMI cable to the projector's HDMI port and the other end to an HDMI port on your computer. Wireless Network You can connect the projector wirelessly over an 802.11g, 802.11b, or 802.11n wireless network. See "Project wirelessly" for instructions. Wired Network You can connect the projector to your network using an Ethernet® cable. See "Project over a wired network" for instructions. Video Device Connect up to 5 video devices and use the Source Search button on the projector or remote control to switch between them. S-Video cable RCA video cable (composite video) Audio cable HDMI cable Component video to VGA cable Audio cable Camera, USB Device, or Epson Document Camera DC-06 Connect a digital camera, USB flash drive, USB storage device, or Epson document camera DC-06 to the projector's USB TypeA (flat) port. If you connect a digital camera, USB flash drive, or USB storage device, you can use the projector's Slideshow feature to project images. See the online User's Guide for details. External Monitor, External Speakers, and Microphone You can also connect an external monitor, external speakers, and a microphone to your projector to enhance your presentations. See the online User's Guide for details. Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. The power light on the projector turns orange. 3 Press the power button on the projector or remote control. The projector beeps, the power light flashes green, and then stays on. Note: To shut down the projector, press the power button twice, then unplug it. You don't have to wait for the projector to cool down. 4 The default language of the menu system is English. To select another language, press the Menu button on the remote control. Select Extended and press . Select Language and press . Select your language and press . Press the Menu button to exit the menu system. *412215800* *412215800*