Epson PowerLite 575W Installation Guide - Page 31
Adjust the vertical slide position of the arm, Tightening the M8 hexagon bolt lowers the wall mount
View all Epson PowerLite 575W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
English G Adjust the vertical slide position of the arm 1. Adjust the vertical slide with the M8 hexagon bolt at the bottom of the wall mount, or the hexagonal shaft at the top of the wall mount. ( ). Start by aligning the notch on the arm with the stamp on the wall plate as shown below. Tightening the M8 hexagon bolt lowers the wall mount, and loosening the bolt raises it. Tightening the hexagonal shaft raises the wall mount, and loosening the shaft lowers it. Hexagonal shaft Alignment marks M8 hexagon bolt 2. Tighten the M6 x 20 mm hexagon shoulder bolt to secure the wall mount ( ). M6 x 20 mm hexagon shoulder bolt 31
31
English
G
Adjust the vertical slide position of the arm
1.
Adjust the vertical slide with the M8 hexagon bolt at the bottom of the wall mount, or the hexagonal
shaft at the top of the wall mount. (
). Start by aligning the notch on the arm with the stamp on the
wall plate as shown below.
Tightening the M8 hexagon bolt lowers the wall mount, and loosening the bolt raises it.
Tightening the hexagonal shaft raises the wall mount, and loosening the shaft lowers it.
2.
Tighten the M6 x 20 mm hexagon shoulder bolt to secure the wall mount (
).
Alignment marks
Hexagonal shaft
M8 hexagon
bolt
M6 x 20 mm hexagon shoulder bolt