Epson PowerLite 575W Installation Guide - Page 39
Adjust the vertical slide, Turn off the display of the test pattern
View all Epson PowerLite 575W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
English J Adjust the vertical slide 1. Loosen the M6 x 20 mm hexagon shoulder bolt ( ). 2. Adjust the vertical slide with the M8 hexagon bolt at the bottom of the wall mount, or the hexagonal shaft at the top of the wall mount ( ). Tightening the M8 hexagon bolt lowers the wall mount, and loosening the bolt raises it. Tightening the hexagonal shaft raises the wall mount, and loosening the shaft lowers it. Hexagonal shaft M6 x 20 mm hexagon shoulder bolt M8 hexagon bolt 3. Tighten the M6 x 20 mm hexagon shoulder bolt you loosened in the first step ( ). K Turn off the display of the test pattern Press the [Esc] button on the remote control or control panel to turn off the test pattern. Warning Tighten all screws firmly. Otherwise, the projector or wall mount may fall and cause personal injury or property damage. 39