Epson PowerLite 73c User Manual - Page 27
warning, control to switch to your video source. Then press
View all Epson PowerLite 73c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
4. Press the P Power button on top of the projector or on the remote control. Page down Page up Power Computer S-Video/Video Color Mode Menu A/V Mute Freeze E-Zoom Enter Auto ESC Projector Remote control The power light flashes green as the projector warms up, and the projection lamp comes on in about 40 seconds. The power light stays green. 5. Do one of the following: ■ If you're using a computer, turn it on or restart it. In a few moments, you should see your computer display projected. (Windows® only: If you see a message saying that it has found a plug-and-play monitor, click Cancel.) ■ If you're projecting a video, press the Source button on top of the projector or the S-Video/Video button on the remote control to switch to your video source. Then press the Play button on your DVD player or other device. If a projected image fails to appear, see the next section for help. Once you see your image, turn to page 25 for instructions on focusing and making other image adjustments. When you're done with your presentation, shut down the projector as described on page 29. Shutting down the projector correctly prevents premature lamp failure and possible damage from overheating. warning Never look into the lens when the lamp is on. This can damage your eyes, and is especially dangerous for children. Using the Projector 21