Epson PowerLite 8150i RS-232 Reference Manual (ESC/VP) - Page 9

ESC/VP Level 6 Serial Communication Manual (Abridged Edition) 6. CONTROL CODE 00 SPECIAL CONTROL Command structure Type STX Apply Size Attribu From te To Group Item Param Checketer sum STX Size Reply Attribu te From To Group Item Param Checketer sum 03 : Power Controls the projector power and gets the present power state. Set 1B 07 01 -- 00 03 01 F4 1B 06 81 C1 -- 00 03 -- CS [Parameter] Data relating to the power states. 0x00: PowerOFF 0x01: PowerON 0x02: Suspend 0x10: During Startup 0x11: Cool down 0x20: System fault } * Although setting 0x02 and later in parameter and sending command to the projector, returns NG in replay. 0x02 and later are available just for informing from the projector. Set 1D 0009 01 01 00 03 00 01 CS 1D 0008 000A 81 C1 10 00 03 -PARA CS Get 1D 0008 02 01 00 03 -- CS 1D 0009 000A 82 C2 10 00 03 PARA CS 06 : Communication rate Controls the communication rate. [Parameter] Data relating to communication rate. 0x00: 9600bps 0x00: 9600bps 0x01: 19200bps 0x01: 19200bps 0x02: 38400bps 0x02: 38400bps 0x03: 57600bps Set 1D 0009 01 01 00 06 PARA CS 1D 0008 000A 81 C1 10 00 06 -PARA CS Get 1D 0008 02 01 00 06 -- CS 1D 0009 000A 82 C2 10 00 06 PARA CS Initialize 1D 0008 03 01 00 06 -- CS 1D 0009 000A 83 C3 10 00 06 PARA CS 09 : Lamp Hour Gets the present lamp hour. [Parameter] Returns the present lamp hour (in hours) (2 bytes) Get 1D 0008 02 01 00 09 -- CS 1D 000A 000A 82 C2 10 00 09 PARA CS 12 : Error information Gets and reports projector error information. [Parameter] Projector error information The following data is set with an OR: 0x00: No error or error is cancelled. 0x01: Fan problem 0x04: Internal temperature is abnormally high. 0x08: Lamp life expectancy is closed to end. 0x20: Lamp problem 0x40: Other failures 0x80: Stack failure (EMP-8100/8150/9100 only) Set 1D 0009 01 01 00 12 -- CS 1D 0008 000A 81 C1 10 00 12 -PARA CS Get 1D 0008 02 01 00 12 -- CS 1D 0009 000A 82 C2 10 00 12 PARA CS 9 of 20