Epson PowerLite 8200i User Manual - Lens Options - Page 15
Mounting the Rear-Projection Wide-Angle Lens
 |
View all Epson PowerLite 8200i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2. Mounting the rear-projection wide-angle lens Warning Be sure to disconnect the power cable before installation, because there is danger of electrical shock. Memo Always mount and dismount the lens in a clean room, to minimize the amount of dust. Excessive dust inside the lens could cause damage. • Note that the illustrations below may not match your particular projector model. 2-1 Removing the current lens (1) Remove the front case. 1. Remove the two mounting screws, and pull off the front case. Front case Screws (two) 13
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
 |
 |
13
2.
Mounting the rear
-pr
ojection wide-angle lens
Warning
Be sure to disconnect the power cable before installa-
tion, because there is danger of electrical shock.
Memo
Always mount and dismount the lens in a
clean room, to minimize the amount of dust.
Excessive dust inside the lens could cause
damage.
•
Note that the illustrations below may not match your particu-
lar projector model.
Front case
Screws (two)
2-1 Removing the current lens
(1) Remove the front case.
1. Remove the two mounting screws, and pull off the front case.