Epson PowerLite 8200i User Manual - Lens Options - Page 28

Mounting the Zoom Lens

Get Epson PowerLite 8200i PDF manuals and user guides View all Epson PowerLite 8200i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

2. Mounting the zoom lens Warning Be sure to disconnect the power cable before installation, because there is danger of electrical shock. Memo Always mount and dismount the lens in a clean room, to minimize the amount of dust. Excessive dust inside the lens could cause damage. • Note that the illustrations below may not match your particular projector model. 2-1 Removing the current lens (1) Remove the front case. 1. Remove the three mounting screws, and pull off the front case. The two components will separate from each other. Front case Screws (three) 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
11
2. Mounting the zoom lens
Warning
Be sure to disconnect the power cable before installa-
tion, because there is danger of electrical shock.
Memo
Always mount and dismount the lens in a
clean room, to minimize the amount of dust.
Excessive dust inside the lens could cause
damage.
•
Note that the illustrations below may not match your par-
ticular projector model.
Front case
Screws (three)
2-1 Removing the current lens
(1) Remove the front case.
1. Remove the three mounting screws, and pull off the front case.
The two components will separate from each other.