Epson PowerLite 83V User's Guide - Page 79

Power, light, Temperature, Description, The lamp is burned out, broken, or not installed correctly

Get Epson PowerLite 83V PDF manuals and user guides View all Epson PowerLite 83V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 79 highlights

Power light Green Flashing green Orange Flashing orange Red Red Red Orange Red Red Lamp light Off Off Temperature light Description Off The projector is operating normally. Off The projector is warming up. Wait for the image to appear. Off Off Off Off Flashing red Flashing orange Off Red Off Off Flashing orange Red Off Off Flashing red Red The projector is in standby or sleep mode. You can unplug it or press the P Power button to turn it on. The projector is shutting down. Wait for the light to stop flashing and remain orange before unplugging it. The projector is too hot. Make sure the temperature surrounding the projector does not exceed 95 °F (35 °C) and there is plenty of space around and under the projector for ventilation. Clean the air filter and air vents, if necessary. See page 70 for instructions. The projector has overheated and turned itself off. Let it cool for about five minutes, then turn it back on. Make sure there is plenty of space around and under the projector for ventilation. If you are using the projector at an altitude above 4921 ft (1500 m), turn on High Altitude Mode as the Operation setting in the Extended menu; see page 58. Also clean the air filter and air vents; see page 70. If it continues to overheat, you may need to replace the air filter. The lamp is burned out, broken, or not installed correctly; or the lamp cover is open. Close the cover or replace or reseat the lamp, if necessary, as described on page 72. Also clean the air filter and air vents; see page 70. If these suggestions don't work, contact Epson. Replace the lamp with a new one as soon as possible; see page 72 for instructions. If you continue to use the lamp, there is a risk it may break. There is a problem with the fan or a sensor. Clean the air filter and air vents; see page 70. If this does not solve the problem, turn the projector off and unplug it. Contact Epson for help; see page 87. There is an internal error in the projector. Turn the projector off and unplug it. Contact Epson for help; see page 87. Solving Problems 79

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
Solving Problems
79
Power
light
Lamp
light
Temperature
light
Description
Green
Off
Off
The projector is operating normally.
Flashing
green
Off
Off
The projector is warming up. Wait for the image to appear.
Orange
Off
Off
The projector is in standby or sleep mode. You can unplug
it or press the
P
Power
button to turn it on.
Flashing
orange
Off
Off
The projector is shutting down. Wait for the light to stop
flashing and remain orange before unplugging it.
Red
Off
Flashing
orange
The projector is too hot. Make sure the temperature
surrounding the projector does not exceed 95
°
F (35
°
C)
and there is plenty of space around and under the projector
for ventilation. Clean the air filter and air vents, if
necessary. See page 70 for instructions.
Red
Off
Red
The projector has overheated and turned itself off. Let it
cool for about five minutes, then turn it back on. Make sure
there is plenty of space around and under the projector for
ventilation. If you are using the projector at an altitude
above 4921 ft (1500 m), turn on High Altitude Mode as the
Operation setting in the Extended menu; see page 58. Also
clean the air filter and air vents; see page 70. If it continues
to overheat, you may need to replace the air filter.
Red
Flashing
red
Off
The lamp is burned out, broken, or not installed correctly;
or the lamp cover is open. Close the cover or replace or
reseat the lamp, if necessary, as described on page 72.
Also clean the air filter and air vents; see page 70. If these
suggestions don’t work, contact Epson.
Orange
Flashing
orange
Off
Replace the lamp with a new one as soon as possible; see
page 72 for instructions. If you continue to use the lamp,
there is a risk it may break.
Red
Off
Flashing red
There is a problem with the fan or a sensor. Clean the air
filter and air vents; see page 70.
If this does not solve the problem, turn the projector off
and unplug it. Contact Epson for help; see page 87.
Red
Red
Red
There is an internal error in the projector. Turn the projector
off and unplug it. Contact Epson for help; see page 87.