Epson PowerLite 9100NL User Manual - Page 46
Turning On the Projector, warning
View all Epson PowerLite 9100NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Turning On the Projector Follow these steps to turn on the projector: 1. Connect one end of the power cord to the projector's power inlet. 2. Connect the other end to a grounded electrical outlet. The power light on the projector's control panel starts flashing orange and then stays orange, indicating that the projector is receiving power but not yet turned on. 3. Remove the lens cap. 4. Press the red Power button on top of the projector (or the remote control) to turn on the projector. (If you are using the remote, make sure it is turned on. See page 48 for more information.) power button power light warning Never look into the lens when the lamp is on. This can damage your eyes, and is especially dangerous for children. The power light flashes green as the projector warms up, and the projection lamp comes on in about 30 seconds. The power light stays green, and you may see a blue screen with the message No Signal displayed. This is normal. 5. Do one of the following: I Turn on or restart your computer. In a few moments, you should see your computer display projected. (Windows only: If you see a New Hardware Found message saying that it has found a plug-and-play monitor, click Cancel.) I If you're projecting a video, turn on your video source and press the Play button. 40 Using the Projector