Epson PowerLite 9100i User Manual - Lens Options - Page 14

Before Mounting the Wide-Angle Lens, Be sure to screw the Rear Projector wide lens

Page 14 highlights

1. Before mounting the wide-angle lens 1-1 Safety precautions Warning Be sure to screw the Rear Projector wide lens and adapter ring down completely. Unless they are securely screwed on, they could fall off and cause damage or injury (especially when the projector is ceiling-mounted). 1-2 Check product contents • Make sure that you have all the parts, as shown below, before starting. Rear lens cap Zoom lens Screwdriver Front lens cap Used to tighter/remove mounting screws Hex wrench User's manual (this document) Used to loosen and tighten the ring mounting screws. • In addition to the included screwdriver, you will also need a Phillips screwdriver, and various other common tools. Memo Be sure to use a Phillips screwdriver that fits the screws properly. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

12
1.
Bef
ore mounting the wide-angle lens
1-1 Safety precautions
Warning
Be sure to screw the Rear Projector wide lens and
adapter ring down completely. Unless they are securely
screwed on, they could fall off and cause damage or
injury (especially when the projector is ceiling-mounted).
1-2 Check product contents
Make sure that you have all the parts, as shown below, before starting.
In addition to the included screwdriver, you will also need a Phillips
screwdriver, and various other common tools.
Memo
Be sure to use a Phillips screwdriver that fits
the screws properly.
Zoom lens
Front lens cap
Rear lens cap
Used to tighter/remove
mounting screws
Screwdriver
User’s manual (this document)
Hex wrench
Used to loosen and tighten
the ring mounting screws.