Epson PowerLite 955W Quick Setup - Page 4

Install network software, Troubleshooting, Where to get help - user manual

Page 4 highlights

6 Select the Wired LAN menu and press . 7 Choose IP Settings and press . 8 If your network assigns addresses automatically, turn on the DHCP setting. If not, turn off the DHCP setting and enter the projector's IP Address, Subnet Mask, and Gateway Address, as needed. Then press Esc. 9 To prevent the IP address from appearing on the network standby screen, set the IP Address Display setting to Off. 10 When you are finished, select Complete and press again to save your settings. , then press 11 Press the Menu button to exit the menu system. 12 See "Install network software" for additional instructions. Install network software Computer Install the EasyMP® Network Projection software on each computer that will project over the network. Use the CD labeled Epson Projector Software to install the program. For instructions on installing and using your network software, click the icon on your desktop to access the online EasyMP Network Projection Operation Guide (requires an Internet connection). If you don't see the EasyMP Network Projection Guide icon, you can install it from the projector CD or go to the Epson website, as described on the right. To monitor and control your projector over the network, download and install the EasyMP Monitor software and manual from the Epson support web site. You can install a link to the downloads page from the projector CD or go to the Epson website, as described on the right. Mobile device To project from an iOS or Android™ device, download and install the Epson iProjection™ app. Visit www.epson.com/projectorapp (U.S.) or www.epson.ca/projectorapp (Canada) for more information. Troubleshooting If you see a blank screen or the No signal message after turning on your computer or video device, check the following: • Make sure the Status light on the projector is blue and not flashing, and the A/V Mute slide is open. • Press the Source Search button on the projector or the remote control to switch to the correct image source, if necessary. • If you're using a Windows laptop, press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear. • If you're using a Mac laptop, open System Preferences and select Displays. Select the Display or Color LCD option if necessary, then click the Arrange or Arrangement tab, and select the Mirror Displays checkbox. Where to get help Manuals For more information about using the projector, click the icons on your desktop to access the online manuals (requires an Internet connection). If you don't have icons to the manuals, you can install them from the projector CD or go to the Epson website, as described below. Telephone support services To use the Epson® PrivateLine® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada). Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Internet support Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson. Registration Register today to get product updates and exclusive offers. You can use the CD included with your projector or register online at www.epson.com/webreg. Optional accessories For a list of optional accessories, see the online User's Guide. You can purchase screens or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). EPSON, EasyMP, and PowerLite are registered trademarks, Epson iProjection is a trademark, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc. Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2013 Epson America, Inc. 9/13 Printed in XXXXXX CPD-39732R1

  • 1
  • 2
  • 3
  • 4

6
Select the
Wired LAN
menu and press
.
7
Choose
IP Settings
and press
.
8
If your network assigns addresses automatically, turn on the
DHCP
setting. If not, turn off the
DHCP
setting and enter the projector’s
IP
Address
,
Subnet Mask
, and
Gateway Address
, as needed. Then
press
Esc
.
9
To prevent the IP address from appearing on the network standby screen,
set the
IP Address Display
setting to
Off
.
10
When you are finished, select
Complete
and press
, then press
again to save your settings.
11
Press the
Menu
button to exit the menu system.
12
See “Install network software” for additional instructions.
Install network software
Computer
Install the EasyMP
®
Network Projection software on each computer that will
project over the network. Use the CD labeled
Epson Projector Software
to
install the program.
For instructions on installing and using your network software, click the icon
on your desktop to access the online
EasyMP Network Projection Operation
Guide
(requires an Internet connection). If you don’t see the EasyMP Network
Projection Guide icon, you can install it from the projector CD or go to the
Epson website, as described on the right.
To monitor and control your projector over the network, download and install
the EasyMP Monitor software and manual from the Epson support web site.
You can install a link to the downloads page from the projector CD or go to the
Epson website, as described on the right.
Mobile device
To project from an iOS or Android™ device,
download and install the Epson iProjection™ app.
Visit
www.epson.com/projectorapp
(U.S.) or
www.epson.ca/projectorapp
(Canada) for
more information.
Troubleshooting
If you see a blank screen or the
No signal
message after turning on your
computer or video device, check the following:
Make sure the
Status
light on the projector is blue and not flashing, and
the
A/V Mute
slide is open.
Press the
Source Search
button on the projector or the remote control to
switch to the correct image source, if necessary.
If you’re using a Windows laptop, press the function key on your keyboard
that lets you display on an external monitor. It may be labeled
CRT/LCD
or
have an icon such as
. You may have to hold down the
Fn
key while
pressing it (such as
Fn
+
F7
). Wait a moment for the display to appear.
EPSON, EasyMP, and PowerLite are registered trademarks, Epson iProjection is a trademark, and EPSON Exceed
Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson
America, Inc.
Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2013 Epson America, Inc. 9/13
Printed in XXXXXX
CPD-39732R1
If you’re using a Mac laptop, open
System Preferences
and select
Displays
. Select the
Display
or
Color LCD
option if necessary, then click
the
Arrange
or
Arrangement
tab, and select the
Mirror Displays
checkbox.
Where to get help
Manuals
For more information about using the projector, click the icons on your
desktop to access the online manuals (requires an Internet connection). If you
don’t have icons to the manuals, you can install them from the projector CD or
go to the Epson website, as described below.
Telephone support services
To use the Epson
®
PrivateLine
®
Support service, call (800) 637-7661. This service
is available for the duration of your warranty period. You may also speak with
a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 6
AM
to 8
PM
, Pacific Time, Monday through Friday, and
7
AM
to 4
PM
, Pacific Time, Saturday. Days and hours of support are subject to
change without notice. Toll or long distance charges may apply.
Internet support
Visit
www.epson.com/support
(U.S.) or
www.epson.ca/support
(Canada) for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson.
Registration
Register today to get product updates and exclusive offers. You can use the CD
included with your projector or register online at
www.epson.com/webreg
.
Optional accessories
For a list of optional accessories, see the online
User’s Guide
.
You can purchase screens or other accessories from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
Or you can purchase online at
www.epsonstore.com
(U.S. sales)
or
www.epson.ca
(Canadian sales).