Epson PowerLite EB-720 Quick Setup - Page 1

PowerLite® EB-720/EB-725W Quick Setup IMPORTANT: Before using the projector, make sure you read these instructions and the safety instructions in the online User's Guide. Note: Your product may differ from the illustrations on this sheet, but the instructions are the same. Connect the projector Computer Choose from the following connections. See the sections below or the online User's Guide for details. VGA cable Microphone Connect a dynamic microphone to the Mic port, using a 3.5 mm mini-jack cable. Video device Connect multiple video devices and use the Source Search button on the projector or remote control to switch between them. For more information on playing sound through the projector, see the online User's Guide. HDMI cable Component video RCA video cable to VGA cable (composite video) Audio cable USB cable HDMI cable HDMI port Connect one end of an HDMI cable to one of the projector's HDMI ports and the other end to an HDMI port on your computer. Computer port Connect one end of a VGA cable to one of the projector's Computer ports, and the other end to your computer's monitor port. If you are using a laptop, switch it to external display (see "Troubleshooting"). You can also connect an audio cable. USB port Connect the square end of a USB cable to the projector's USB-B (square) port. Connect the flat end of the cable to any USB port on your computer. Windows® 7 or later: After turning on the projector, follow the on-screen instructions to install the Epson® USB Display software (EMP_UDSE.EXE; only on first connection). If the software screen does not display automatically, open My Computer, Computer, or This PC, then double-click EPSON_PJ_UD. OS X 10.8.x or higher: After turning on the projector, the setup folder for USB Display appears in the Finder. Double-click USB Display Installer and follow the on-screen instructions to install the Epson USB Display software (only on first connection). If the software screen does not display automatically, doubleclick EPSON_PJ_UD, then double-click USB Display Installer. External monitor and speakers You can connect an external monitor and external speakers to your projector to enhance your presentations. See the online User's Guide for details. Wired network Connect the projector to your network using an Ethernet cable. See "Wired network configuration" for more information. Camera, USB device, or document camera Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07 document camera to the projector's USB-A (flat) port. USB cable If you connect a digital camera, USB flash drive, or USB storage device, you can use the projector's PC Free feature. You can also connect other Epson document cameras to the projector. See the online User's Guide for details.