Epson PowerLite EB-720 Quick Setup - Page 3

Wired network configuration Follow these steps to set up your projector for a wired network connection. 1 Press the Menu button on the remote control, select the Network menu, then press . 2 Choose Network Settings and press . 3 Select Wired LAN as the Priority Control Interface setting. 4 Select the Wired LAN menu and press . 5 Choose IP Settings and press . 6 If your network assigns addresses automatically, make sure the DHCP setting is on. If not, make sure DHCP is off and enter the projector's IP Address, Subnet Mask, and Gateway Address, as needed. Then press Esc. 7 To prevent the IP address from appearing on the network standby screen, set the IP Address Display setting to Off. 8 When you are finished, return to the Network Settings menu and select Set to apply your settings. 9 Press the Menu button to exit the menu system. Install the optional software Download the Epson iProjection™ software and manual from your product's support page (see "Where to get help") and install the program on each computer that will project over the network. To monitor and control your projector over the network, download and install the Epson Projector Management software (Windows only) and manual from your product's support page (see "Where to get help"). Project over a network If you need to configure the projector for a wired network, see "Wired network configuration" on the back of this sheet. 1 Press the LAN button on the remote control. You see this screen: 3 Select Advanced Connection Mode and click OK. 4 Select the projector you want to connect to, then click Join. If you don't see the projector you want, click the Automatic search button to find the projector automatically, click the Manual search button to enter the projector's IP address, or click the Profile button to find the projector based on a previously saved profile. 5 If you see a message asking for a keyword, enter the four digits that appear on the LAN standby screen and click OK. Your computer image is projected, with a floating toolbar: When you're done presenting, click Disconnect All on the toolbar. Using the Epson iProjection app You can project wirelessly from a mobile device (iOS, Android™, or Chromebook™) using the Epson iProjection app and a QR code. 1 Use the following QR code to download and install the Epson iProjection app. 2 If you connected the projector to a network wirelessly, make sure to connect your mobile device to the same network. 3 Press the LAN button on the remote control to display a QR code on the projector screen. 4 Start Epson iProjection on your mobile device. 5 Use the QR code reader feature to read the QR code displayed. 2 Start Epson iProjection on your computer. Windows 10: Select Ver X.XX. > EPSON Projector > Epson iProjection Windows 8.x: Navigate to the Apps screen and select Epson iProjection Ver. X.XX. Windows 7: Select or Start > Programs or All Programs > EPSON Projector > Epson iProjection > Epson iProjection Ver X.XX. macOS: Double-click the Epson iProjection icon in the Applications folder. 6 Follow the app instructions to connect your device to the projector. For more information on setting up and using this app, visit www.epson.com/projectorapp (U.S.), www.epson.ca/projectorapp (Canada) or www.latin.epson.com/iprojection (Caribbean).