Epson PowerLite Home Cinema 3010 User's Guide - Page 76
WirelessHD images are displayed, but the picture quality is low.
View all Epson PowerLite Home Cinema 3010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
■ Make sure that your projector is connected to the correct WirelessHD device. See"WirelessHD Settings" on page 47 for more information. ■ You may need to reset the WirelessHD connection. Turn off both the WirelessHD Transmitter and the projector. Start playback on your video device, then turn on the WirelessHD Transmitter and the projector. Wait 10 seconds, then press the Setup button on the back of the transmitter. ■ Make sure the WirelessHD Transmitter is not placed on a metal surface, as this may interfere with the signal. ■ If the green and orange lights on the transmitter are flashing, the unit may be overheating. Make sure the vents on the back of the transmitter are not blocked and that the room temperature does not exceed 95 °F (35 °C). WirelessHD images are displayed, but the picture quality is low. The resolution and overall image quality are automatically adjusted based on the strength of the WirelessHD signal. Check the WirelessHD reception (see page 47) and adjust the position of the transmitter, if necessary. 76 Problem Solving