Epson PowerLite Home Cinema 725HD Operation Guide - EasyMP Network Projection - Page 79
Event, Cause, Remedy, EasyMP Network Projection ended
View all Epson PowerLite Home Cinema 725HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Event ID 0433 0484 04FE 04FF 0891 0892 0893 0894 0898 0899 089A 089B 089C 089D Cause Remedy Cannot play transferred images. Restart EasyMP Network Projection. Communication was disconnected from the computer. EasyMP Network Projection ended unexpectedly. Check the status of network communications. Restart the projector. A system error occurred in the projector. Restart the projector. Cannot find an access point with the same SSID. Set the computer, the access point, and the projector to the same SSID. The WPA/WPA2 authentication type does not Check that the wireless LAN security settings match. are correct. The WEP/TKIP/AES encryption type does not match. Communication was disconnected because the projector connected to an unauthorized access point. Contact your network administrator for more information. Failed to acquire DHCP. Check the DHCP server to see if it is operating correctly and check the LAN cable to see if it is connected correctly. If you are not using DHCP, turn off the DHCP setting. Other communication errors If restarting the projector or EasyMP Network Projection does not solve the problem, contact Epson as described in your projector User's Guide. The EAP authentication type is not the same. EAP server authentication failed. EAP client authentication failed. Check that the wireless LAN security settings are correct. Also, check if the certificate is installed correctly. Key exchange failed. 79