Epson PowerLite Pro Cinema 1080 User's Guide - Page 38

■ Motion Detection Signal > Motion Detection This setting specifies how signals are converted to progressive signals. Select a lower setting for slow-moving or still images (S) or select a higher number for video images (M). Note: This setting applies only when viewing composite video, S-video, component video, or 480i or 575i RGB video. ■ Noise Reduction Signal > Noise Reduction This setting reduces flickering of analog images. You can select from 3 levels of noise reduction. Color Settings If the image colors don't look correct, you can adjust them using these settings. Use the first three settings described below to make the most visible changes. If you only need to make slight adjustments, you can fine-tune the picture with the remaining settings. Most color settings are stored separately for each image source and color mode. ■ Color Saturation Image > Color Saturation Adjusts the color intensity of the image. ■ Tint Image > Tint Shifts the color balance between magenta and green. ■ Abs. Color Temp. Image > Abs. Color Temp. Shifts the color balance between red and blue, making the image appear warmer or cooler. You can also access this setting by pressing the ColorTemp. button on the remote control. See page 30 for more information. 38 Making Detailed Adjustments