Epson PowerLite Pro Cinema 4040 Users Guide - Page 128
Power light, Status light, Lamp light, Status and solution, High Altitude
View all Epson PowerLite Pro Cinema 4040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Power light Blue Off Blue Off Status light Flashing blue Lamp light Temp light Off Off Off Varies Off Off Off Flashing orange Flashing blue Off Orange Status and solution Warming up; wait for an image to appear Shutting down; when the status light stops flashing, you can unplug the projector Standby or sleep mode Projector is too hot • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects • Clean or replace the air filter • Make sure the environmental temperature is not too hot Projector has overheated and turned off; leave it turned off to cool down for about five minutes, then do the following: • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects • Clean or replace the air filter • If operating the projector at high altitude, turn on High Altitude Mode • If the problem persists, unplug the projector and contact Epson for help 128