Epson PowerLite Pro Cinema 4040 Users Guide - Page 129

Power light Off Blue Off Off Off Off Status light Flashing blue Lamp light Temp light Orange Off Varies Flashing Off orange Flashing blue Off Flashing orange Flashing blue Flashing orange Flashing orange Flashing blue Orange Orange Flashing blue Flashing Off orange Status and solution Lamp has a problem • Check the Lamp Hours in the Info menu to see if the lamp is burned out. Unplug the projector, wait for the lamp to cool down, and check if it is broken or installed incorrectly; reseat or replace the lamp as necessary • Clean or replace the air filter • Make sure the lamp cover is closed • If operating the projector at high altitude, turn on High Altitude Mode • If the problem persists, unplug the projector and contact Epson for help Replace the lamp soon to avoid damage; do not continue using the projector A fan or sensor has a problem; turn the projector off, unplug it, and contact Epson for help Auto Iris or Cinema Filter error; turn the projector off, unplug it, and contact Epson for help Power error; turn the projector off, unplug it, and contact Epson for help Internal projector error; turn the projector off, unplug it, and contact Epson for help Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help. 129