Epson PowerLite Pro G5650W Operation Guide - PC Free - Page 20

Other functions Registering a Digital Certificate to the Projector When Security is set to EAP-TLS from the projector's Network menu, you need to register the client certificate and the CA certificate in the projector for authentication. This section describes the method for using PC Free to register a digital certificate that has been saved in a USB storage device, to the projector. Digital certificates that can be registered Only one set of client certificate and CA certificate can be registered in the projector. If another digital certificate is registered, it overwrites the previous certificate. Type Client certificate CA certificate Exten sion Notes .pfx Certificates without passwords (NULL) cannot be used. .cer Certificates encoded in binary format (DER). Certificates encoded in base64 cannot be used. Registering a Client Certificate Procedure A Connect the USB storage device on which the digital certificate is stored to the projector and start PC Free. s p.7 The file list screen is displayed. 20 B Press the [h] button on the remote control or [w/ ], [v/ ], [/ ] buttons on the control panel to position the cursor over the client certificate (PFX file) icon, and then press the Esc button. C Select "Digital certificate" from the menu displayed, then press the Enter button. The following screen is displayed. D Enter the password using the soft keyboard. (you can enter up to 32 single-byte alphanumeric characters)