Epson PowerLite Pro G5950 User's Guide - Page 53
Using the Direct Power On Function, warning
View all Epson PowerLite Pro G5950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
The projector beeps once and the Ppower light flashes green as the projector warms up, then an image begins to appear. When the Ppower light stops flashing and remains green, the projector is ready for use. 4. If you are prompted to enter a password, see page 122. Using the Direct Power On Function The Direct Power On function enables faster setup. The projector starts up automatically when you plug it in or turn it on with a wall switch. You don't have to press the Ppower button. Follow these steps to enable Direct Power On: 1. Press the Menu button on the remote control or projector, then select the Extended menu and press Enter. 2. Choose Operation and press Enter. 3. Choose Direct Power On and press Enter. warning Never look into the lens when the lamp is on. This can damage your eyes, and is especially dangerous for children and pets. 4. Highlight On and press Enter. 5. Press Menu to exit. The setting will take effect the next time you plug in the projector. note If a power outage occurs when Direct Power On is enabled and the projector is plugged in, the projector will restart when the power is restored. Setting Up the Projector 53