Epson PowerLite Pro G5950 User's Guide - Page 97
Removing the Wireless 802.11g/b/a Module
View all Epson PowerLite Pro G5950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Removing the Wireless 802.11g/b/a Module Follow these steps to remove the module from your projector. 1. If you're running EasyMP Network Projection, click Disconnect on the control bar. Click Disconnect 2. Check the access light to make sure it isn't flashing. Access light caution Never remove the module while its access light is green or when projecting wirelessly. You may damage the module. 3. Turn off the projector and unplug it. Using the Projector on a Network 97
Using the Projector on a Network
97
Removing the Wireless 802.11g/b/a
Module
Follow these steps to remove the module from your projector.
1.
If you’re running EasyMP Network Projection, click
Disconnect
on the control bar.
2.
Check the access light to make sure it isn’t flashing.
3.
Turn off the projector and unplug it.
Click
Disconnect
caution
Never remove the module
while its access light is green
or when projecting
wirelessly. You may damage
the module.
Access light