Epson PriorityFAX 1000 User Manual - Page 40
One-touch Telephone Dialing, Registering One-touch Telephone Numbers, Registering One-touch
![]() |
View all Epson PriorityFAX 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
PriorityFax 1000 M anual One-touch Telephone Dialing Registering One-touch Telephone Numbers The PriorityFax allows you to register three one-touch telephone numbers for dialing frequently called numbers by pushing just one button. If you prefer using one-touch dialing for fax numbers, see Chapter 2 First you must register the one-touch telephone numbers. Note Using one-touch dialing requires use of the telephone's memory capability. Your telephone unit requires annual replacement of two button batteries to ensure that the telephone numbers stored in memory are not erased during a power failure. See Memory Batteries in Chapter 2. To register one-touch telephone numbers, first set the TONE/ PULSE switch as described on page 3-2 Then follow the steps below: Lift the telephone handset and locate the DIAL TONE RESET button, which is the large button at the bottom. REDIAL While holding down DIAL TONE RESET, enter the telephone number using the keypad. If you are using an international access code, press REDIAL after the code and before the rest of the number. Also, if your telephone system requires a code such as 9 before a telephone number, press REDIAL to enter a pause after the code. A maximum of 16 digits (15 if tone is selected) may be entered for each one-touch number. (A pause counts as one digit.) 3- 4
![](/manual_guide/products/epson-priorityfax-1000-user-manual-56a4751/40.png)