Epson R320 Start Here Card - Page 3
Unwrap the ink cartridges.
 |
UPC - 010343851825
View all Epson R320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
3 Unwrap the ink cartridges. Don't touch the green circuit board or remove any labels 4 Open the cartridge cover and remove the paper insert. 5 Lower each cartridge into its holder with the green circuit board facing the front. The color of the cartridge label should match the marker above the cartridge holder. Then gently push each ink cartridge down until it is firmly seated. 6 Close the cartridge cover. 7 Press the Maintenance button and close the printer cover. CAUTION: Don't turn off the printer or interrupt charging while the light is flashing or you'll waste ink. A progress bar is displayed on the LCD panel during ink charging. 8 After ink charging is finished, press OK.
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
3
Unwrap the ink cartridges.
4
Open the cartridge cover and remove the paper insert.
5
Lower each cartridge into its holder with the green circuit board facing the front.
The color of the cartridge label should match the marker above the cartridge holder.
Then gently push each ink cartridge down until it is firmly seated.
6
Close the cartridge cover.
7
Press the
Maintenance
button and close the printer cover.
CAUTION: Don’t turn off the printer or interrupt charging while the light is flashing or
you’ll waste ink.
A progress bar is displayed on the LCD panel during ink charging.
8
After ink charging is finished, press
OK
.
Don’t touch the green circuit
board or remove any labels