Epson R800 User's Guide - Page 16

Loading Roll Paper - replacement

Page 16 highlights

Loading Roll Paper You can load 4-inch and 8.3-inch wide roll paper for printing multiple photos or panoramics, with or without borders. Tip: It's a good idea to check and make sure your ink cartridges are not low before loading and printing on roll paper. If you need to replace a cartridge with roll paper loaded, you should remove the paper or marks may appear in your printout. 1. Turn on the printer and remove any paper loaded in the sheet feeder at the top of the printer. 2. Open the output tray, but don't pull out the extensions. Also make sure the tray is in the lower position (see page 13). 3. Place the roll paper on the holders as shown, then remove the tape and protective paper from the end of the roll. 4. Make sure the end of the paper is cut 90° straight across, with 90° corners. If the end is cut diagonally, you may have problems feeding the paper. 5. If the paper curls at the end, roll it backwards between a folded sheet of paper to uncurl it. Avoid touching the printable surface of the roll paper. 16 Loading Paper

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116

16
Loading Paper
Loading Roll Paper
You can load 4-inch and 8.3-inch wide roll paper for printing multiple photos or
panoramics, with or without borders.
Tip:
It’s a good idea to check and make sure your ink cartridges are not low
before loading and printing on roll paper. If you need to replace a cartridge with
roll paper loaded, you should remove the paper or marks may appear in
your printout.
1.
Turn on the printer and remove any
paper loaded in the sheet feeder at the top
of the printer.
2.
Open the output tray, but don’t pull out
the extensions. Also make sure the tray is
in the lower position (see page 13).
3.
Place the roll paper on the holders as
shown, then remove the tape and
protective paper from the end of the roll.
4.
Make sure the end of the paper is cut
straight across, with 90° corners. If the
end is cut diagonally, you may have
problems feeding the paper.
5.
If the paper curls at the end, roll it
backwards between a folded sheet of
paper to uncurl it.
Avoid touching the printable surface of
the roll paper.
90°