Home » Epson Manuals » Printers » Epson S40600 » Manual Viewer

Epson S40600 User Manual - Page 12

How To, Overview

Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

How To Overview This section describes the general procedure on how to set up the network interface for use on a network. 1. Check the network interface operation. Check the functions and operations of the network interface, such as status lights and RJ-45 connector. See "Network Interface Operation" on page 10 for details. 2. Select a printing method. Select a printing method appropriate for your network environment and operating system. If you are not sure, see "Printing from Windows" on page 13 or "Printing from OS X" on page 13 for details. 3. Install the necessary components on your computer. Make sure the necessary components (such as TCP/IP) are installed on the computer, and network settings (such as IP address, subnet mask, etc.) of the computer is set. See "About Installing Components on Your Computer" on page 14 for details. 4. Connect the network interface to the network. Connect the network interface to the network. See "Connecting the Network Interface to the Network" on page 18 for details. 5. Configure the network interface and install the printer driver. See "Configuring the Network Interface (Windows)" on page 19, "Configuring the Network Interface (OS X)" on page 20, or "Installing the Printer Driver" on page 21 for details. 6. If necessary, configure the network settings of the network interface using EpsonNet Config. Configure the network interface using EpsonNet Config. For Windows users, see "EpsonNet Config for Windows" on page 31. For OS X users, see "EpsonNet Config for Mac OS" on page 32. How To 12

Section	Page
Copyright and Trademarks	2
Safety Instructions	7
Warning, Caution, Important, and Note	7
Introduction	8
About Your Printer	8
About This Guide	8
Operating Environment	9
Features of the Network Interface	9
Network Interface Operation	10
Status light	10
Network connector	10
About the Software	11
How To	12
Overview	12
Selecting a Printing Method	13
Printing from Windows	13
Printing from OS X	13
Features of the Printing Methods	13
Installing Components on Your Computer	14
About Installing Components on Your Computer	14
Windows 8.x/7/Vista/Server 2012/Server 2008	14
Windows XP	15
Windows Server 2003	17
OS X	18
Setting Up the Network Interface	18
Connecting the Network Interface to the Network	18
Configuring the Network Interface (Windows)	19
Configuring the Network Interface (OS X)	20
Installing the Printer Driver	21
About Installing the Printer Driver	21
Windows 8.x/7/Vista/Server 2012/Server 2008	21
Windows XP	24
Windows Server 2003	27
OS X	30
Network Software	31
EpsonNet Config for Windows	31
About EpsonNet Config	31
System Requirements	31
Installing EpsonNet Config	31
Accessing the EpsonNet Config User’s Guide	32
EpsonNet Config for Mac OS	32
About EpsonNet Config	32
System Requirements	32
Installing EpsonNet Config	33
EpsonNet Config with Web Browser	33
About EpsonNet Config	33
Configuring the Network Interface Using EpsonNet Config with Web Browser	33
Opening Screen	36
Remote Manager	36
About Remote Manager	36
Configuring the Network Interface Using Remote Manager	36
EpsonNet Print (for Windows users)	36
About EpsonNet Print	36
System Requirements	37
Installing EpsonNet Print	37
Configuring the Printer Port	43
Troubleshooting	45
General Problems	45
Cannot configure the network interface or cannot print from the network.	45
Cannot print even if you have assigned the IP address to the computer and the printer.	45
Unable to start EpsonNet Config with.	45
The message “EpsonNet Config cannot be used because no network is installed.” appears when you start EpsonNet Config.	46
Unable to start EpsonNet Config with Web Browser or Remote Manager.	46
The Model Name and IP Address do not appear in the EpsonNet Config dialog box.	46
Printing a Network Status Sheet	46
Tips for Administrator	47
Setting an IP Address on the Printer’s Control Panel	47
Secure Communication Using IPsec, Access Control, SSL, and IEEE 802.1X	47
IPsec protocol	47
Access Control	47
SSL	48
IEEE 802.1X	48
Secure Communications (IPsec/Access Control)	49
Overview and Sample Settings	49
Configuration Workflow	50
Product Security Policies	51

Match case Limit results 1 per page

How To

Overview

This section describes the general procedure on how to set up the network interface for

use on a network.

Check the network interface operation.

Check the functions and operations of the network interface, such as status lights and

RJ-45 connector. See “Network Interface Operation” on page 10 for details.

Select a printing method.

Select a printing method appropriate for your network environment and operating

system. If you are not sure, see “Printing from Windows” on page 13 or “Printing from

OS X” on page 13 for details.

Install the necessary components on your computer.

Make sure the necessary components (such as TCP/IP) are installed on the computer,

and network settings (such as IP address, subnet mask, etc.) of the computer is set.

See “About Installing Components on Your Computer” on page 14 for details.

Connect the network interface to the network.

Connect the network interface to the network. See “Connecting the Network Interface

to the Network” on page 18 for details.

Configure the network interface and install the printer driver.

See “Configuring the Network Interface (Windows)” on page 19, “Configuring the

Network Interface (OS X)” on page 20, or “Installing the Printer Driver” on page 21 for

details.

If necessary, configure the network settings of the network interface using EpsonNet

Config.

Configure the network interface using EpsonNet Config. For Windows users, see

“EpsonNet Config for Windows” on page 31. For OS X users, see “EpsonNet Config for

Mac OS” on page 32.