Epson Stylus 1000 Product Information Guide - Page 4

EPSON STYLUS 1000 LOAD/EJECT Press this button to load or eject a sheet of paper. If you have been printing from the manual feed slot, pressing this button switches paper loading back to the paper feeder. FONT Press this button to cycle through the font choices on the font menu. The FONT lights indicate the current selection. ECONOMY/CONDENSED Press this button to select economy printing or condensed mode. The indicator lights indicate which mode is on. ALT Hold down this button for several seconds to move the print head to the ink cartridge replace position when the printer is paused. The ALT button also alters the functions of the other buttons. Hold down the ALT button and press another button to change the functions as follows: PRINT HEAD CLEANING (ALT + PAUSE) Starts the print head cleaning cycle. LF/FF (ALT + LOAD/EJECT) Press this button briefly to feed the paper forward one line. Hold this button down to eject a single sheet or to advance continuous paper to the top of the next page. You can also use this button to feed continuous paper from the paper-park position to the loading position. MICRO FEED: (ALT + FONT) Feeds paper forward in 1/180-inch increments. (ALT + ECONOMY/CONDENSED) Feeds paper backward in 1/180-inch increments. Character Fonts Your printer has eight built-in character fonts including two new fonts: EPSON Roman T and EPSON Sans Serif H. (Roman T is similar to the Times™ font; Sans Serif H is similar to Helvetica.™ ) Press the FONT button to select from the eight fonts listed on the control panel. The three FONT lights come on (N) or go off (O) to indicate the active font. Note: t Roman T and Sans Serif H fonts are available in proportional spacing only. t Font selections you make with your software program usually override these control panel selections. For best results, use your software program to select fonts. The table below lists the available fonts and shows how the FONT lights appear for each selection. Default-Settings Mode Your printer comes with a series of internal settings that control a variety of printer functions, such as print direction and auto line feed. Because these settings take effect each time you turn on the printer, they are called default settings. The factory default settings are designed to meet the needs of most users, so you may not need to change them. The table below lists all the features you can select in the default-settings mode. Settings Character table Auto print direction Continuous-paper page length Skip-over-perforation Network interface mode Mixed text/graphics mode Auto line feed Auto interface selection Auto interface wait time Tear off Options Italic U.S.A., Italic France, Italic Germany, Italic U.K., Italic Denmark, Italic Sweden, Italic Italy, Italic Spain 1, PC437, PC850, PC860, PC863, PC865, PC853*, PC857*, PC437 Greek*, PC851*, PC855*, PC866*, PC852*, BRASCII**, Abicomp** On, Off 11 inches, 12 inches, 8.5 inches, 70/6 inches On, Off On, Off On, Off On, Off On, Off 10 seconds, 30 seconds On, Off * Available only in the European version ** Available only in the North/South American version EPSON STYLUS 1000-4 4/26/94 Ink Jet Printers