Epson Stylus C60 Start Here Card - Page 1

Epson Stylus C60 - Ink Jet Printer Manual

Get Epson Stylus C60 - Ink Jet Printer PDF manuals and user guides View all Epson Stylus C60 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

EPSON Stylus® C60 SStatrat rHtereHere 11Unpack 1 Remove everything from the box. printer paper support ink cartridges CD-ROM Printer Basics 2 Remove all the tape and packing material. 3 Peel off tape and remove the insert. 4 Fit the paper support into its three slots. remove the insert 22Connect the Printer Connect the printer to your computer using either a USB cable or parallel cable. Don't connect both cables; you only need one or the other. Follow the instructions in the appropriate section below. If You Have a USB Port (Does not support Windows® 95.) 1 Make sure the printer and computer are turned off. 2 Connect the square end of the USB cable to your printer's USB port. 3 Connect the flat end of the cable to any available USB port on your computer. If You Have a PC Parallel Port 1 Make sure the printer and computer are turned off. 2 Connect the larger end of the parallel cable to your printer's parallel port. Then secure it with the wire clips. 3 Connect the other end of the cable to your computer's parallel port and secure it as necessary.

  • 1
  • 2
  • 3
  • 4
1
ink cartridges
paper support
printer
1
Unpack
1
Remove everything from the box.
2
CD-ROM
2
Connect the Printer
2
Remove all the tape and
packing material.
4
Fit the paper support
into its three slots.
Start Here
EPSON Stylus
®
C60
Start Here
Printer Basics
3
Peel off tape and remove the insert.
remove the
insert
Connect the printer to your computer using either a USB cable or parallel cable.
Don’t connect both
cables; you only need one or the other.
Follow the instructions in the appropriate section below.
If You Have a USB Port
(Does not support Windows
®
95.)
1
Make sure the printer and computer are turned off.
2
Connect the
square end of the USB cable to your printer’s USB port.
3
Connect the
flat end of the cable to any available USB port on your computer.
If You Have a PC Parallel Port
1
Make sure the printer and computer are turned off.
2
Connect the larger end of the parallel cable to your printer’s parallel port.
Then secure it with the wire clips.
3
Connect the other end of the cable to your computer’s parallel port and secure it as necessary.