Epson Stylus C66 Product Information Guide - Page 6

Additional Paper Loading Guidelines, Replacing an Ink Cartridge, Low ink, Empty cartridge - cartridges

Page 6 highlights

EPSON Stylus C66 Additional Paper Loading Guidelines ❏ Don't load paper above the arrow on the left edge guide. ❏ Load the printable side face-up. It's often brighter or whiter than the other side. ❏ Always load paper short edge first, even when printing in landscape mode. ❏ Load letterhead or preprinted paper into the printer top edge first. ❏ If you're using special media, follow the instructions that came with the media. ❏ You can load the following number of sheets of Epson special media: Paper type Premium Bright White Paper Photo Quality Ink Jet Paper Photo Quality Ink Jet Cards All Purpose Glossy Photo Paper Glossy Photo Paper or Photo Paper DURABrite Ink Glossy Photo Paper Premium Semigloss Photo Paper PremierArt Matte Scrapbook Photo Paper Matte Paper Heavyweight Ink Jet Transparencies Double-Sided Matte Paper Loading capacity Up to 120 sheets 80 sheets 30 cards with a support sheet beneath the stack 20 sheets 20 sheets with a support sheet beneath the stack 20 sheets with a sheet of plain paper beneath the stack 1 sheet Empty cartridge: When the red H ink light stays on, you need to replace the cartridge(s). When you print you'll also see a message on the screen telling you which cartridge is empty. 1. Turn on the printer. 2. Lower the printer's output tray, pull out the extension, and open the cover. 3. Press and release the H ink button. If your ink light is off, go to step 5. If your ink light is on or flashing, the print head moves to the left, and the cartridge that needs to be replaced stops under the _ ink out mark. The P power light begins to flash. Replacing an Ink Cartridge Caution: To ensure good results, use genuine Epson ink cartridges and don't refill them. Other products may cause damage to your printer not covered by Epson's warranty. You cannot print if a cartridge is empty. Leave any empty cartridges installed until you have obtained a replacement. Otherwise, the remaining ink in the nozzles may dry out. Use these ink cartridges within six months of installing them and before the expiration date on the package: ❏ Black: T044120 ❏ Cyan: T044220 ❏ Magenta: T044320 ❏ Yellow: T044420 Low ink: When the red H ink light flashes, one or more ink cartridges are low on ink. When you print, you'll also see a message on the screen telling you which cartridge is low. 4. Press the H ink button again. ❏ If more than one cartridge is empty, the next cartridge moves under the _ ink out mark. ❏ If all the empty cartridges have been identified, the print head moves to the ink cartridge replacement position. Note: You can also use the Status Monitor to find out which cartridge is out of ink. See your on-screen User's Guide for more information. 6 - EPSON Stylus C66 3/04

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

EPSON Stylus C66
6 -
EPSON Stylus C66
3/04
Additional Paper Loading Guidelines
Don’t load paper above the arrow on the left edge guide.
Load the printable side face-up. It’s often brighter or whiter
than the other side.
Always load paper short edge first, even when printing in
landscape mode.
Load letterhead or preprinted paper into the printer top
edge first.
If you’re using special media, follow the instructions that
came with the media.
You can load the following number of sheets of Epson
special media:
Replacing an Ink Cartridge
Caution:
To ensure good results, use genuine Epson ink cartridges and don’t
refill them. Other products may cause damage to your printer not
covered by Epson’s warranty.
You cannot print if a cartridge is empty. Leave any empty cartridges
installed until you have obtained a replacement. Otherwise, the
remaining ink in the nozzles may dry out.
Use these ink cartridges within six months of installing them
and before the expiration date on the package:
Black: T044120
Cyan: T044220
Magenta: T044320
Yellow: T044420
Low ink
: When the red
H
ink light flashes, one or more ink
cartridges are low on ink. When you print, you’ll also see a
message on the screen telling you which cartridge is low.
Empty cartridge
: When the red
H
ink light stays on, you need
to replace the cartridge(s). When you print you’ll also see a
message on the screen telling you which cartridge is empty.
1.
Turn on the printer.
2.
Lower the printer’s output tray, pull out the extension, and
open the cover.
3.
Press and release the
H
ink button.
If your ink light is off, go to step 5.
If your ink light is on or flashing, the print head moves to
the left, and the cartridge that needs to be replaced stops
under the
_
ink out mark. The
P
power light begins to
flash.
4.
Press the
H
ink button again.
If more than one cartridge is empty, the next cartridge
moves under the
_
ink out mark.
If all the empty cartridges have been identified, the print
head moves to the ink cartridge replacement position.
Note:
You can also use the Status Monitor to find out which cartridge is
out of ink. See your on-screen
User’s Guide
for more information.
Paper type
Loading capacity
Premium Bright White Paper
Up to 120 sheets
Photo Quality Ink Jet Paper
80 sheets
Photo Quality Ink Jet Cards
30 cards with a support
sheet beneath the stack
All Purpose Glossy Photo Paper
Glossy Photo Paper or Photo Paper
DURABrite Ink Glossy Photo Paper
Premium Semigloss Photo Paper
PremierArt Matte Scrapbook Photo Paper
20 sheets
Matte Paper Heavyweight
20 sheets with a support
sheet beneath the stack
Ink Jet Transparencies
20 sheets with a sheet
of plain paper beneath
the stack
Double-Sided Matte Paper
1 sheet