Epson Stylus COLOR 800N User Setup Information - Page 30
Changing Your Port Setting, Highlight the EPSON Stylus COLOR 800 printer - stylus color 800 driver
View all Epson Stylus COLOR 800N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Setup Guide 3. If you inserted the CD-ROM and Windows starts the installation program automatically, go to step 4. If it doesn't start automatically (or if you're using Windows NT 3.5x), click Start, select Run, and type D:\Setup (substitute the correct drive letter if necessary). Then click OK. Go to step 4. If you're installing from diskettes, click Start, select Run, and type A:\Setup (substitute the correct drive letter if necessary). Then click OK and go to step 5. 4. At the EPSON Setup CD window, make sure Complete Installation is selected and click Next. 5. Select EPSON Stylus COLOR 800 in the Printer Model tab and click OK. 6. Follow the instructions on the screen to install the software. After you install the printer driver, you need to set up your port, following the instructions below. Changing Your Port Setting The installation program for your printer driver automatically sets your printer on LPT1. In Windows NT 4.x, make sure the TCP/IP Print server service is running before you start. Then follow these steps change to the correct port under Windows 95 or Windows NT 4.x: 1. Click Start, Settings, Printers. 2. Highlight the EPSON Stylus COLOR 800 printer and right-click the icon. 3. Select Properties. 4. In Windows 95, click the Details tab. In Windows 4.x, click the Ports tab. 27