Epson Stylus Photo 1200 Product Information Guide - Page 4

Environmental, Electrical, Safety Approvals, Interfaces, Parallel interface, Serial interface - usb

Page 4 highlights

EPSON Stylus Photo 1200 Environmental Temperature Operation Storage* Transit* Humidity Operation Storage* 50 to 95 °F (10 to 35 °C) - 4 to 104 °F (-20 to 40 °C) 1 month at 104 °F (40 °C) -4 to 140 °F (-20 to 60 °C) 120 hours at 140 °F (60 °C) 20 to 80% RH 5 to 85% RH (without condensation) * Stored in shipping container Electrical Specification Input voltage range Rated frequency range Input frequency range Rated current Power consumption 120V model 240V model* 99V to 132V 198V to 264V 50 to 60 Hz 49.5 to 60.5 Hz 0.4A 0.2A Approx. 18 W (ISO 10561 Letter Pattern) Approx. 5 W in standby mode * Also designed for IT power systems with Phase to Phase voltage 220-240V Safety Approvals Safety standards UL 1950, CSA 22.2 No. 950 EMC FCC part 15 subpart B class B Interfaces Parallel interface Forward channel Specification Data format Synchronization Handshake timing Signal level Connector Description 8-bit parallel, IEEE-1284 compatibility mode STROBE pulse BUSY and ACKNLG signals TTL compatible 57-30360 Amphenol connector or equivalent Reverse channel Specification Transmission mode Adaptable connector Synchronization Handshaking Signal level Data transmission timing Description IEEE-1284 Nibble mode 57-30360 Amphenol connector or equivalent Refer to the IEEE-1284 specification Refer to the IEEE-1284 specification IEEE-1284 Level 1 device Refer to the IEEE-1284 specification Serial interface Specification Standard Synchronization Bit rate Handshaking Word format Connector Recommended cable Description Based on RS-423 Synchronous Approximately 1.8 Mbps X-ON/X-OFF and DTR protocol Data bit: 8 bits Parity bit: None Start bit: 1 bit Stop bit: 1 bit 8-pin mini-DIN ImageWriter II serial cable (preferably Belkin brand) USB interface Specification Standard Bit rate Data encoding Adaptable connector Recommended cable length Description Based on Universal Serial Bus Specifications Revision 1.0, Universal Serial Bus Device Class Definition for Printing Devices Version 1.0 12 Mbps (full speed device) NRZI USB Series B 6.5 feet (2 meters) or less 4 - EPSON Stylus Photo 1200 3/99

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

EPSON Stylus Photo 1200
4 -
EPSON Stylus Photo 1200
3/99
Environmental
Temperature
Operation
50 to 95 °F (10 to 35 °C)
Storage*
–4 to 104 °F (–20 to 40 °C)
1 month at 104 °F (40 °C)
Transit*
–4 to 140 °F (–20 to 60 °C)
120 hours at 140 °F (60 °C)
Humidity
Operation
20 to 80% RH
Storage*
5 to 85% RH (without condensation)
*
Stored in shipping container
Electrical
*
Also designed for IT power systems with Phase to Phase voltage
220–240V
Safety Approvals
Safety standards
UL 1950, CSA 22.2 No. 950
EMC
FCC part 15 subpart B class B
Interfaces
Parallel interface
Serial interface
USB interface
Specification
120V model
240V model*
Input voltage range
99V to 132V
198V to 264V
Rated frequency range
50 to 60 Hz
Input frequency range
49.5 to 60.5 Hz
Rated current
0.4A
0.2A
Power consumption
Approx. 18 W (ISO 10561 Letter Pattern)
Approx. 5 W in standby mode
Forward channel
Specification
Description
Data format
8-bit parallel, IEEE-1284 compatibility mode
Synchronization
STROBE
pulse
Handshake timing
BUSY and ACKNLG
signals
Signal level
TTL compatible
Connector
57-30360 Amphenol connector or equivalent
Reverse channel
Specification
Description
Transmission mode
IEEE-1284 Nibble mode
Adaptable connector
57-30360 Amphenol connector or
equivalent
Synchronization
Refer to the IEEE-1284 specification
Handshaking
Refer to the IEEE-1284 specification
Signal level
IEEE-1284 Level 1 device
Data transmission timing
Refer to the IEEE-1284 specification
Specification
Description
Standard
Based on RS-423
Synchronization
Synchronous
Bit rate
Approximately 1.8 Mbps
Handshaking
X-ON/X-OFF and DTR protocol
Word format
Data bit: 8 bits
Parity bit: None
Start bit: 1 bit
Stop bit: 1 bit
Connector
8-pin mini-DIN
Recommended cable
ImageWriter II serial cable (preferably Belkin
brand)
Specification
Description
Standard
Based on Universal Serial Bus Specifications
Revision 1.0, Universal Serial Bus Device Class
Definition for Printing Devices Version 1.0
Bit rate
12 Mbps (full speed device)
Data encoding
NRZI
Adaptable
connector
USB Series B
Recommended
cable length
6.5 feet (2 meters) or less