Epson Stylus Pro 10000 - Archival Ink Quick Reference Guide - Page 7
Checking Ink Levels and Replacing Ink Cartridges, Checking Ink Levels, Replacing Ink Cartridges
View all Epson Stylus Pro 10000 - Archival Ink manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Checking Ink Levels and Replacing Ink Cartridges Before you begin a large print job, you should check your ink levels. If one of your cartridges is low, you can replace it before you start. Or, you can wait until the ink runs out, replace the cartridge, and then continue the job without any loss of print quality. Checking Ink Levels 1 Press the SelecType button until PRINTER STATUS MENU appears on the display. 2 Press the Item button. VERSION appears, indicating the firmware version installed in your printer. 3 Continue pressing the Item button to display the amount remaining for each of the 6 inks: E*****F = full E ****F = 3/4 full E ***F = 1/2 full E **F = 1/4 full E *F = nearly empty E F = empty 4 Press SelecType to exit the Printer Status menu. When one of the INK OUT lights stays on and INK OUT is displayed, the cartridge is empty. To replace the cartridge, first make sure the printer is on. 1 Push the indentation on the ink compartment cover to release the lock and open the cover. Replacing Ink Cartridges When one of the INK OUT lights is flashing and INK LOW is displayed on the control panel, the corresponding cartridge is nearly empty. Make sure you have the correct replacement cartridge. 2 Locate the slot containing the empty ink cartridge corresponding to the Ink Out light. Press down on the top of the clamp and pull it forward. Photographic Dye ink: Black Yellow Magenta Cyan Light Magenta Light Cyan T499201 T500201 T501201 T502201 T503201 T504201 Archival ink: Black Yellow Magenta Cyan Light Magenta Light Cyan T511201 T512201 T513201 T514201 T515201 T516201 6 Continue L