Epson Stylus Pro 3800 Portrait Edition Warranty Statement - Page 7

Repackaging and Transportation Instructions: To avoid permanently damaging the printer, it is extremely important that you follow the instructions below when preparing to ship or transport the printer. (Please refer also to the additional instructions in your Printer Guide.) NOTES: • In case shipment of the printer for service becomes necessary, to prevent unrepairable damage to the printer, the printer should be packaged in its original box and packaging materials. If you do not have these items, you must contact Epson and Epson will supply appropriate items for your shipment. • To prevent ink from spilling and damaging the printer during shipping or other transport, the printer must be shipped or transported with ink cartridges installed. The printer is equipped with a pressurized valve system that closes and seals all ink supply lines. In order for this valve system to properly close, the ink cartridges must be installed and the ink bay door needs to be closed. Empty cartridges can be used for transportation purposes. INSTRUCTIONS: 1) Turn on the printer. 2) Remove any paper or other media in the printer. 3) Make sure the ink cartridges are installed in the printer and the ink bay door is closed. Note: If you have the original 80 ml cartridges that came with the printer (even if they are empty), install them before shipping the printer. To store any partially used cartridges that you take out before shipment, tape over the needle valve hole until you are ready to use the cartridges again. 4) Make sure the print head is in the home (far right) position. 5) Turn off the printer and unplug the power cord. Install the carriage retainer bracket to secure the print head in place.