Epson Stylus Pro 3880 Designer Edition Start Here - Page 2
Turn On the Printer, Install Ink Cartridges
View all Epson Stylus Pro 3880 Designer Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Turn On the Printer 1 Connect the power cable. (Do not connect the printer cable yet.) 2 Press the Power button. After a minute, the ink cover is automatically released. Ink cover Install Ink Cartridges 1 Lift the ink cover. N ote: If the ink cover is locked, press the Ink cover open button on the control panel to release it. 2 Unpack the 9 ink cartridges and shake each one gently. 3 Install each cartridge in the correct slot for its color. The arrow mark should be on top and pointing into the printer. Caution: Do not touch the green chip on top of the cartridge. Arrow Push each cartridge in until it clicks. 4 After you install all 9 ink cartridges, close the cover. The printer starts charging the ink. This takes 7 or 8 minutes. The LCD displays READY when charging is complete. Caution: Do not turn off or unplug the printer while the power light is flashing and you see the message CHARGING INK on the LCD. Also, do not lift the ink cover or load paper during the process. Note: The first time you install ink cartridges, the printer uses some ink to charge the printing system, so print yields may be lower with the first cartridges. Subsequent ink cartridges will last for their full rated life.