Epson Stylus Pro 3880 Designer Edition Start Here - Page 5

Load Paper You can load paper in the auto sheet feeder, the rear manual feed slot, or the front manual feed slot. In the front or rear slot, load just one sheet at a time. Follow the instructions below to load paper in the auto sheet feeder or the rear manual slot. To load special media in the front slot, see the User's Guide. Note: Some paper types cannot be loaded in the auto sheet feeder. Check the User's Guide to make sure you are using the correct paper path for your media. Auto Sheet Feeder 1 Flip open the paper guide and pull out its extensions to accommodate your paper size. 2 Press the front cover to release it and open the output tray. 3 Use both hands to pull out and extend the output tray, lifting it slightly as you pull. Make sure the arrow marks on the tray and inside the printer are aligned. 4 Pull out the extensions as needed for your paper size. 5 Squeeze the left edge guide and slide it to the left. Then load your paper against the right edge guide short edge first, glossy or brighter side face up. 6 Squeeze the left edge guide and slide it against the paper. Rear Manual Slot 1 Attach the rear sheet guide by inserting the tabs as shown.