Epson Stylus Pro 7000 Product Information Guide - Page 1
Epson Stylus Pro 7000 - Print Engine Manual
View all Epson Stylus Pro 7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
EPSON Stylus Pro 7000 series - ink cartridge compartment roll paper cover paper set lever control panel lower cover paper hammock Note: The stand is optional. paper set lever optional interface shield plate AC inlet USB interface connector parallel interface connector Note: The parallel and USB interfaces cannot be connected at the same time. Printer Specifications Printing Printing method On-demand ink jet Nozzle configuration Black: 64 nozzles Color: 64 nozzles for each color: (cyan, magenta, yellow, light cyan, light magenta) Resolution Maximum 1440 dpi × 720 dpi Maximum 23.76 inches on 24-inch paper printable width Print direction Bidirectional or unidirectional (user-selectable) Control code ESC/P® Raster Line spacing 1/6 inch (default), programmable in 1/360-inch increments Paper feed speed 200 ± 10 milliseconds per 1/6-inch line RAM 10MB Engine Reliability Total print volume 20,000 A1 images, 30% coverage (or 5 years) Print head life Two billion dots per nozzle Periodic maintenance Waste ink system requires replacement after approximately 12,000 sheets under normal usage (parts and labor not covered under warranty) Cutter blade life Approximately 2000 A1 sheets (EPSON media up to 4.33 mil thick) Electrical Specification Input voltage range Rated frequency range Input frequency range Rated current Power consumption 120V Model 220−240V Model 90 to 132V 198 to 264V 50 to 60 Hz 49 to 61 Hz 1.0A 0.5A Approx. 100W (ISO/IEC 10561 Letter Pattern) 15W or less in standby mode 8/00 EPSON Stylus Pro 7000 series - 1