Epson Stylus Pro 7000 Product Information Guide - Page 12

EPSON Stylus Pro 7000 series 6. If you're using the stand, remove the wing screws and washers from the left and right sides, and keep them in a safe place. Moving the Printer on the Stand When you want to transport the printer a short distance, such as within the same building or facility, you can roll the printer on its casters. Caution: Do not roll the printer on angled or uneven surfaces. 1. Make sure that the power cord, interface cable, roll paper spindles and sheet media are removed, and the roll paper cover and lower cover are closed. You don't need to remove the ink cartridges. 2. Release the front casters and retract the stabilizer knobs. 7. Have two or more people lift the printer off the stand, using the hand grips. Warning: The printer weighs approximately 96 lb (43.5 kg). Always have two or more people lift it, using the hand grip areas. 8. Keep the printer level while you move it. Setting Up the Printer After Transporting It Setting up the printer after transporting it is almost identical to setting it up for the first time. Whenever you set up the printer, see the Assembly and Setup Instructions, and note the following: EPSON recommends installing new cartridges after transporting the printer. Because of the ink charging process, you will not be able to save ink by reinstalling used cartridges. 3. Carefully roll the printer to its new location. Relock the casters and extend the stabilizer knobs after moving. After you move the printer, you may need to run a cleaning cycle and realign the print head to maintain print quality. Related Documentation CPD-10836 CPD-10837 4011817 4012672 EPSON Stylus Pro 7000 series Printer Guide EPSON Stylus Pro 7000 series Quick Reference Guide EPSON Stylus Pro 7000 Assembly and Setup Instructions EPSON Stylus Pro 7500 Assembly and Setup Instructions 12 - EPSON Stylus Pro 7000 series 8/00